Fish Tank Filter

Seachem PhosGuard 4L Remove Phosphate & Silicate Aquarium Fish Filter Media

Seachem PhosGuard 4L Remove Phosphate & Silicate Aquarium Fish Filter Media
Seachem PhosGuard 4L Remove Phosphate & Silicate Aquarium Fish Filter Media
Seachem PhosGuard 4L Remove Phosphate & Silicate Aquarium Fish Filter Media
Seachem PhosGuard 4L Remove Phosphate & Silicate Aquarium Fish Filter Media
Seachem PhosGuard 4L Remove Phosphate & Silicate Aquarium Fish Filter Media
Seachem PhosGuard 4L Remove Phosphate & Silicate Aquarium Fish Filter Media
Seachem PhosGuard 4L Remove Phosphate & Silicate Aquarium Fish Filter Media
Seachem PhosGuard 4L Remove Phosphate & Silicate Aquarium Fish Filter Media
Seachem PhosGuard 4L Remove Phosphate & Silicate Aquarium Fish Filter Media

Seachem PhosGuard 4L Remove Phosphate & Silicate Aquarium Fish Filter Media   Seachem PhosGuard 4L Remove Phosphate & Silicate Aquarium Fish Filter Media

Seachem PhosGuard 4-Liter Remove Phosphate & Silicate Aquarium Fish Filter Media. PhosGuard&#####x2122; rapidly removes phosphate and silicate from marine and freshwater aquaria. Although PhosGuard&#####x2122; is effective in both fresh and marine water, it will operate better in sea water and the need for it is better defined in sea water.

It is not recommended for phosphate buffered freshwater (PhosGuard&#####x2122; would remove the buffer until saturated). PhosGuard&#####x2122; is highly porous and bead-shaped to promote easy water &#####xFB02;ow through and around it, thereby increasing both its efficiency and capacity. Sizes: 100 mL, 250 mL, 500 mL, 1 L, 2 L, 4 L.

Product&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0; PO4 bound. PhosGuard (Alumina Oxide)&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0; 0.87 mg/g. PhosBond (GFO and Alumina Oxide hybrid)&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0;&#######xA0; 1.19 mg/g. PhosNet (GFO) 1.41 mg/g.

May generate heat on initial contact with water. Pre-wet by adding to a double volume of freshwater, followed by a rinse.

For best results, PhosGuard&#####x2122; should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Use of a filter bag is recommended. Use 85 mL (1/3 cup) for every 200 L (50 US gallons) saltwater or 400 L (100 US gallons) freshwater. Leave product in place for 4 days, then test phosphate or silicate concentrations with either MultiTest&#####x2122; Phosphate or MultiTest&#####x2122; Silicate.

If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosGuard&#####x2122;, otherwise leave in place until levels begin to climb again. As long as concentrations remain under control, the product is not exhausted. Over treating is not recommended.

Continuous use of small quantities is better than intermittent use of larger quantities. Any product you return must be in the same condition you received it and in the original packaging. PhosGuardT Removes silicate and phosphate Spherical for optimal hydrodynamics Irreversible binding Overview PhosGuardT rapidly removes phosphate and silicate from marine and freshwater aquaria. Although PhosGuardT is effective in both fresh and marine water, it will operate better in sea water and the need for it is better defined in sea water. It is not recommended for phosphate buffered freshwater (PhosGuardT would remove the buffer until saturated).

PhosGuardT is highly porous and bead-shaped to promote easy water? Ow through and around it, thereby increasing both its efficiency and capacity.

Sizes: 100 mL, 250 mL, 500 mL, 1 L, 2 L, 4 L Comparing Seachem Phosphate Removers Product PO4 bound PhosGuard (Alumina Oxide) 0.87 mg/g PhosBond (GFO and Alumina Oxide hybrid) 1.19 mg/g PhosNet (GFO) 1.41 mg/g Directions May generate heat on initial contact with water. For best results, PhosGuardT should be rinsed before use and placed so as to maximize the flow of water through it but not so that it tumbles against itself in flow. Leave product in place for 4 days, then test phosphate or silicate concentrations with either MultiTestT Phosphate or MultiTestT Silicate.

If the concentration of the component you are trying to decrease has not dropped to around 0.02 mg/L, then replace the PhosGuardT, otherwise leave in place until levels begin to climb again. The item "Seachem PhosGuard 4L Remove Phosphate & Silicate Aquarium Fish Filter Media" is in sale since Sunday, June 2, 2019. This item is in the category "Pet Supplies\Fish\Water Tests & Treatment". The seller is "aquatees-fishland" and is located in CAMPBELLFIELD. This item can be shipped worldwide.
  • Water Type: All Water Types
  • Test/Treatment Parameter: Phosphate
  • Model: N/A
  • Modified Item: No
  • MPN: N/A
  • Custom Bundle: No
  • Brand: Seachem
  • Tank Width: N/A
  • Tank Capacity: N/A
  • Type: Water Additive

Seachem PhosGuard 4L Remove Phosphate & Silicate Aquarium Fish Filter Media   Seachem PhosGuard 4L Remove Phosphate & Silicate Aquarium Fish Filter Media